Local Voice

AP&T provides the quality and reliability you would expect for Local Voice telephone service combined with a comprehensive set of Calling Features and Voice Messaging.  Contact your local office to discuss pricing.

Find out about the Lifeline and Link-Up Program.

Custom Calling Features

Depending on service location, AP&T can provide a variety of Calling Features available individually upon request through your local office.

Call Forwarding

Allows you to transfer incoming calls, but not existing calls, to another telephone number.  While the transfer is in effect you will hear one short ring at your telephone when an incoming call is forwarded.  You may still make calls from your telephone while the feature is enabled.  Call Forwarding will remain in effect until you discontinue the feature from your telephone.

To Enable Call Forwarding:

  • Lift the handset and listen for dial tone.
  • Dial the activating code *72 (in some areas the activating code is 72#).
  • Listen for dial tone.
  • Dial the number to which you want your calls transferred. Speed Calling codes may be used, if applicable.
  • When the party answers, your forwarding is in effect.
  • If there is no answer or the line is busy, depress the hookswitch/plunger for about 5 seconds, then repeat steps 2 to 5 within 2 minutes. When you hear 2 beeps, your Call Forwarding is in effect.
  • If the party is unable to accept your Call Forwarding, you must discontinue the transfer (see below) before trying another number.

To Disable Call Forwarding:

  • Lift the handset and listen for dial tone.
  • Dial the deactivating code *73. (in some areas the deactivating code is 73#).
  • Call Forwarding is now discontinued and you may replace the handset.
Call Waiting

Call Waiting alerts you that another call is waiting as it permits you to hold your first call and answer the second. A beep tone indicates another call is waiting, one reminder tone will be heard 10 seconds later if the second call still remains unanswered and the second caller hears the normal ringing tone only.

To Answer the Second Call:

  • Depress the hookswitch/plunger (or flash button) for about ½ second to hold the first call.
  • You will automatically be connected with the second caller.

To Alternate Between Calls:

  • By depressing the hookswitch/plunger (or flash button) you may alternate between calls.
  • Each conversation is private and cannot be heard by the other caller.

To Terminate the First Call:

  • End conversation with your party.
  • Hang up.
  • Your telephone will ring.
  • When you answer it, you are connected to the second caller.
Note: Call Waiting cannot be established if an additional instrument is in use on your line.
Cancel Call Waiting

This feature provides you with the ability to disable the call waiting feature for the duration of one call. You will not be disturbed while on this call. Also, it’s useful when transmitting data using a computer and you do not wish to have the call interrupted.

To Activate Cancel Call Waiting Prior to Placing a Call:

  • Lift the handset and listen for dial tone.
  • Dial *70 (on rotary dial phones, dial 70 and wait four seconds). You will receive another dial tone. Place your call as normal. Call Waiting tones have been cancelled for this call.
Speed Calling 8

You can call up to 8 of your most frequently dialed numbers by calling a one-digit code. This includes long distance DDD numbers. When saving a long distance number, enter 1 + Area Code + Phone Number. The maximum number of digits you can program for each number is 28.

To Establish Your Speed Calling List:

  • Lift the receiver and listen for the dial tone.
  • Dial *74.
  • Again, listen for the dial tone.
  • Dial one of the 8 one-digit access code numbers (2-9).
  • Then dial the number you wish to speed code.
  • Then press the # button. (With a rotary dial phone, skip this step and allow a 4-second pause.)
  • Listen for confirmation tone to indicate your speed calling number is established.
  • At any time you may repeat this process for each number you wish to speed code, assigning each a different number.

To Use Your Speed Calling Feature:

  • Lift the receiver and listen for the dial tone.
  • Dial the appropriate one-digit access number (2-9).
  • Push the # button. With a rotary dial phone, skip this step and allow a 4-second pause for your number to be connected.

To Change Your Speed Calling List

  • Simply follow the same steps for establishing your list. A new number automatically cancels out the corresponding existing number.
Speed Calling 30

You can call up to 30 of your most frequently dialed numbers by dialing a two-digit code. This includes long distance DDD numbers. When saving a long distance number, enter 1+ Area Code + Phone Number. The maximum number of digits that you can program for each number is 28.

To Establish Your Speed Calling List:

  • Lift the receiver and listen for the dial tone.
  • Dial *75.
  • Again, listen for the dial tone.
  • Dial one of the 30 two-digit access code number (20-49).
  • Then dial the number you wish to speed code.
  • Then depress the # button. With a rotary dial phone, skip this step and allow a 4-second pause.
  • Listen for confirmation tone to indicate your speed calling number is established.
  • At any time you may repeat this process for each number you wish to speed code, assigning each a different code number.

To Use Your Speed Calling Feature:

  • Lift the receiver and listen for dial tone.
  • Dial the appropriate two-digit access number (20-49).
  • Push the # button. With a rotary dial phone, skip this step and allow a 4-second pause for your number to be connected.

To Change Your speed Calling List:

  • Simply follow the same steps for establishing your list. A new number automatically cancels out the corresponding existing number.
Three Way Calling

Three Way Calling allows you to call another party and add them to your conversation.

Add a Third Party:

  • Depress the hookswitch/plunger (or flash button) for about one second to hold your existing call.
  • Immediately dial the number of the third party. Speed calling codes may be used if applicable.
  • When the third party answers, you may talk privately before completing your three way connection.
  • To add the holding party, depress the hookswitch/plunger (or flash button) for about one second; your three way conversation is now in effect.
  • If the third party does not answer or if the line is busy, depress the hookswitch/plunger (or flash button) twice and you will be reconnected to your original party.

To Disconnect the Third Party:

  • Depress the hookswitch/plunger (or flash button) for about one second.
  • You will now be restored to your original call.
  • A new third party may now be added by following the steps for “To Add a Third Party.”

To Disconnect Completely:

  • Hang up.
  • If either of the other parties hangs up, you can continue talking with the one remaining.

Note: Three way calling cannot be established if an additional instrument is in use on your line.

Anonymous Call Rejection

When you subscribe to Caller ID, this service will route any incoming calls for a telephone number that is blocked to a recording. Your phone will not ring; instead, callers will hear a message indicating that you are not accepting calls that are blocked.

To Use Anonymous Call Rejection:

  • Lift the handset and listen for the dial tone.
  • Dial the activating code *77 (1177 for rotary phones).
  • Listen for confirmation tone or announcement, and then hang up.

To Cancel Anonymous Call Rejection:

  • Lift the handset and listen for the dial tone.
  • Dial the deactivating code *87 (or 1187 for rotary phones).
  • Listen for confirmation tone or announcement, and then hang up.
Anonymous Call Blocking

Per Call Blocking prevents your name and number from being delivered on a single call. Instead, the word “PRIVATE” or “ANONYMOUS” will display if you are calling someone who has Caller ID. At the time Caller ID is made available in your area, Per Call Blocking will be added to your line and there is no charge to use it.

To Activate Per Call Blocking:

  • Lift the handset and listen for dial tone.
  • Dial the access code *67 (or 1167 on rotary phones).
  • Dial the number you wish to call.

Per Line Blocking prevents your name and telephone number from being delivered on all calls. The word “PRIVATE” or “ANONYMOUS” will display if you are calling someone who has Caller ID. There is no charge for this service. However, if you order line blocking, then change your mind and have it removed, then reorder the service, a fee would apply for the second installation. The option of displaying your number on specific individual calls is available at no additional charge.

To Display Your Number On an Individual Call:

  • Lift the receiver and listen for dial tone.
  • Dial the access code *82 (or 1182 on rotary phones).
  • Dial the number you wish to call.
Call Trace

If you receive harassing or obscene phone calls and feel that you need assistance, Call Trace may help. Upon request, traced information will be turned over to local law enforcement authorities. Under no circumstances will you be given the name or the telephone number of the person who called you. There is a $5 charge for each *57 activation. If the situation becomes life threatening, contact the police immediately.

To Trace a Local Call:

  • Hang up immediately.
  • Lift the handset and listen for dial tone.
  • Press “*57” (1157 on rotary phones).
  • A recording will confirm that your call has been traced.
  • Follow the recorded instructions.
Last Call Return

Last Call Return will identify/return the number of the last incoming call whether answered or not.

To Use Last Call Return

  • Lift the handset and listen for dial tone.
  • Dial the access code “*69” (1169 for rotary phones).
  • You will hear the number of the call you missed.
  • If you want to return the call, press 1. If not, hang up.
  • If the line is busy, listen for announcement and hang up.
  • The busy line will be dialed for the next half hour.
  • You will receive a special call-back ring when the line is free.
  • Pick up the receiver and the number you are calling will ring.

To Cancel Last Call Return

  • Lift the handset and listen for dial tone.
  • Press *89 (1189 on rotary phones).
  • Listen for confirmation announcement.
Selective Call Acceptance

To Activate Selective Call Acceptance:

  • Lift the handset and listen for dial tone.
  • Dial the access code *64.
  • Follow the recorded instructions.
Selective Call Rejection

To Activate Selective Call Rejection:

  • Lift the handset and listen for dial tone.
  • Dial the access code *60.
  • Follow the recorded instructions.
Selective Call Forwarding

Selective Call Forwarding allows you to create a list of telephone numbers, and program them to be forwarded to a telephone number of your choice.

To Activate Selective Call Forwarding:

  • Lift the handset and listen for dial tone.
  • Dial the access code *63.
  • Follow the recorded instructions.

To Deactivate Selective Call Forwarding:

  • Lift the handset and listen for dial tone.
  • Dial the access code *83.
  • Follow the recorded instructions.
Caller ID (Calling Number Delivery)

Calling Number ID lets you see the number of the person calling you. The date and time of day each call was received can also be displayed. You need to have a Caller ID display device to use this service. For information on purchasing a display device, call your local business office.

This service usually displays phone numbers that are inside your local calling area, unless the caller has blocked his number.

If the number is not available, the screen will show “Out Of Area” or “Private Number” instead of the phone number.

If you have Call Waiting and Calling Number ID, the phone numbers of waiting calls are not displayed because the unit must first hear one ring before it can display a number.

Voice Messaging With E-mail Notification

Whether at home or as a business owner, you wouldn’t think of not returning an important call, much less one that may generate revenue. So why trust your important messages to a cell phone that may be out of range or battery power? Or worse, a piece of equipment that may malfunction, doesn’t take messages while you’re on the other line and stops working altogether if the lights go out?

For just $2.00 per mo., AP&T’s new enhanced Voice Messaging eliminates each of those problems by eliminating the need for a machine, taking all of your calls while you’re busy on other lines and even continuing to work if the power is out! PLUS our e-mail notification feature allows you to have your Voicemail delivered to your e-mail as well….simply click and listen!

Voice Messaging Guide

GETTING STARTED

To enter and setup your voicemail box from HOME, dial *94.  When the greeting begins, press 0 for Mailbox Options.  Next a voice prompt will guide you through the necessary steps to setup and personalize your mailbox allowing you to record your name, greeting, outgoing messages and passcode.

Your security passcode must be a four (4) digit number, easy to remember, yet hard for someone else to guess. While setting up your voicemail, you may return to the main menu at any time by pressing the * key on your phone.

AWAY FROM HOME

To access your voicemail while out of town or from a wireless phone, dial the local access number shown that represents your home calling area.

  • Craig is 907.826.0888
  • Haines is 907.766.0888
  • Metlakatla is 907.886.0888
  • Petersburg is 907.772.0888
  • Skagway is 907.983.0888
  • Tok is 907.883.0888
  • Wrangell is 907.874.0888

Next, enter your seven (7) digit home phone number (do not include the area code). Then, enter your security passcode number to access your messages.

Once you have accessed your voicemail, the automated system will tell you if you have new messages and will give you prompts for additional options such as retrieving old messages, re-recording your outgoing message(s) or changing your passcode.

MAIN MENU PROMPTS

  • Press 1 To Listen to New Messages
  • Press 2 To Listen to Saved Messages
  • Press 0 For Mailbox Options

Within each of the above Main Menu selections are several sub-prompts to assist in the management of messaging activity. The next panel provides a brief overview of the functions within each Main Menu Item.

It is important to remember the maximum capacity of your mailbox is thirty (30) messages. This includes both new messages and old messages that have been saved. The maximum length of each message cannot exceed two (2) minutes. Callers will be unable to leave messages in a voicemail box that has reached the thirty (30) message capacity.

MAIN MENU FUNCTIONS

  • Pressed 1, Listening To Messages: Users may play, save, delete, undelete and replay their messages.
  • Pressed 2, Listen to Saved (Old) Messages: This option allows users to review and manage their saved messages.
  • Pressed 0, Mailbox Options: This option provides the user with management tools to record and change your user name, all outgoing message greetings and your security passcode.

REMINDER: In all menu modes, the user may press the * key to return to the main menu at any time.  Similarly, the # key may be pressed to exit the voicemail system.

EMAIL NOTIFICATION

AP&T Voicemail can send your voicemail directly to your email inbox each time a new message is received.  Simply Click and Listen.

Please speak with your local office to setup the AP&T Voicemail Email Notification for your service.

Repair Services

Prior to making contact with AP&T for assistance with your telephone service, these steps can help you determine why your phone isn’t working:

1. Check to see if all your telephones are hung up.
2. Perform a visual inspection of all exposed wiring and connections for damage or loose connections.
3. When there is more than one outlet, check each instrument at each outlet to determine if proper operation can be obtained from any outlet. If proper operation is obtained from any outlet, the trouble has been isolated to an instrument or house wiring.
4. In order to isolate jack or house wiring problems, simply move a working telephone to each outlet in the house to determine which location is causing the trouble.
5. Network Interface (NID) may have been installed where your telephone service wire comes into your premise. This test point is there to assist in isolating your wiring trouble from the telephone company’s trouble.

Follow these steps to test your service at the Network Interface Device (NID)

1. Inside cover information for step-by-step troubleshooting.

CAUTION: Remove plug from test jack before making wire changes.

TO TEST LINE: Remove plug from test jack-plug in working phone. If you can make a call, problem is inside house. If you cannot make a call, unplug phone, replace plug in test jack and contact your local office.

2. Plug RJ 11 Jack. Squeeze top of plug and gently pull straight out.

3. Inside wire, binding posts (all posts have color coded wires terminated to them.

Company Organization

AP&T provides Local Exchange Carrier (LEC) telephone services through the three companies below.

Alaska Telephone Company (ATC)

ATC is the largest local exchange carrier in AP&T’s family of companies, originally called National Utilities, Inc. ATC serves the communities of Craig, Haines, Hollis, Hydaburg, Hyder, Klukwan, Metlakatla, Naukati, Petersburg, Skagway, Tanacross, Tetlin, Tok and Wrangell.

Bettles Telephone (BTI)

AP&T purchased Bettles Telephone in 1993 as a wholly owned subsidiary. BTI serves the northern communities of Bettles, Jim River Camp and Allakaket. The Allakaket exchange was acquired in 1998 from Pacific Telecom Inc. now known as Alaska Communications Systems (ACS). BTI serves approximately 177 access lines.

North Country Telephone (NCTI)

AP&T purchased North Country Telephone in 1994 as a wholly owned subsidiary. NCTI serves Eagle Alaska, which a long rich history related to the Gold Rush and the Yukon River. NCTI serves approximately 200 access lines.